3 years warranty
Ultrasonic Wind Sensor PB200 (with GPS, Compass, Inclinometer and Air Data Sensor in one package). No moving parts.
# 81 00 00 €
package # 81 00 00 comprises the "Wind" Display, the Precision Wind Sensor,
a 25m (80 ft) mast cable, bus cable and connectors. A power connection cable
and bus terminator is required once in a system (#500115, €_27.58).
# 81 01 00
# 30 00 00
Wind data can be displayed on any display in the system, e.g. on a "Log" Display or "Multi" Display. This reduces system cost. However, if required, any number of "Wind" Displays may be added.
Bright yellow LED-pointer around face of display shows
apparent and true wind angle.
Precision Wind Sensor
# 81 01 05
|Precision Wind Sensor
Cobwebs could eventually block an anemometer wheel
during calm periods. However, the Tecnautic Wind Sensor has a little motor inside, that
will free it automatically, every time power is turned on.
€ 621.09 Web Price € 558.98
Option: AirmarŪ PB200
The AirmarŪ PB200 Ultrasonic
Wind Sensor has no moving parts and comes together with a built in GPS receiver, a
Heading-Sensor, an Inclinometer and an air pressure and temperature
sensor, all in the same housing. Data are transmitted by the sensor in NMEA
format and are shown on the Cockpit displays or - with the included "WeatherCaster" software
- on a PC screen.
have 40 mm (1.5 in.) large digits and can display all available parameters of the system.
Click here for features and description.
part # 40 02 05 ... with yellow
|Mast Angle Sensor
(for rotating mast)
# 81 01 40
|In case of a rotating mast, the mast angle
has to be taken into account, when measuring the wind direction. This is a
fully automatic feature on the TECNAUTIC Wind Instruments. A mast angle sensor
has to be installed at the mast foot and will be connected to a sensor input
of a Cockpit Display.
Mast Angle Sensor: € 293.15 Web price € 263.84