Log-6

3 years warranty


list price and
Web-Order price
are including 5% tax

Receive 20% reduction for TecnauticDirect orders over the web!

For general features see System Overview

Components:

logsen2.gif (6988 bytes)The Log-6 consists of the "Log" Display and a Log Sensor (Regatta Speed Sensor depicted).

A power connection cable for the bus is required once in a system (# 500115   ¥ 2,588 list / ¥ 2,070 web order price).

logsen2.gif (6988 bytes)
Regatta Speed-Sensor
ls4.jpg (4660 bytes)
Cruise Speed-Sensor
ls3.jpg (4167 bytes)
Planing Speed-Sensor


Select the Speed and Temperature Sensor:

Three different speed sensors are available (all are retractable). A 10m (33 ft) cable is included with the sensor, with a water tight connector fitted just next to it.

Speed Sensor: Part # Speed Range List Price¥ Web Price made by
Regatta 610105 0,3 ... 30 kt 13,288 10,630 TECNAUTIC
Cruise 620105 1,0 ... 32 kt 13,288 10,630 AIRMAR
Planing 630105 2,0 ... 48 kt 13,288 10,630 AIRMAR

Log Mixer and Switcher
For added safety, two speed sensors may be installed symmetrically on the hull. Normally, speed is averaged over both sensors. If one sensor fails, only the remaining one will be used.
On Multi Hulls it may be necessary to measure boat speed only on the leeward hull. Sensor switching will then be automatic as a function of wind angle or heel angle.



Log Display
# 61 01 00
¥ 56,228
(¥ 44,982 web order price)
Log Display:
Log data can be displayed on any display in the system, e.g. on a "Multi" Display. This reduces system cost. However a standard set of instruments will normally also include a "Log" Display. Click here for general features of the Cockpit Display. Detailed functions are found in the manual. Speed data can be output in NMEA0183 format, if required.

Bright yellow LED-pointer around face of display shows amplified speed without delay: once round for each knot.

The digital LCD displays:
· Water Speed (1/100 kt)
· Average Speed
· Trip and Total Log Distance
· Timer and Race Timer
· Water Temperature
· D.R. Position (requires compass)
· Calibration setting
· Battery Voltage
· Any other desired function available in the system, e.g. Heading, or Depth etc.


Optional JUMBO Displays have 40 mm large digits (1.5 in.) and can display all available parameters of the system. Size 160 x 78 x 55 mm.
part # 40 02 05 ... with yellow digits
part # 40 02 10 ... with red digits
(
¥ 66,438 list / ¥ 53,151 web order price).

A bus cable with a sealed connector is required once for every group of Jumbos: (# 500410, 10m length, (
¥ 4,895 list / ¥ 3,916 web order price)

Click here for features and description.

[ Yen_.pdf ] --[ user manual ] -- [Cabling] -- [ Part List Yen ]