Wind E2

System Overview Fly-By-Wire Autopilots Rudder Drive Hydraulics Mini Gyro Compass Depth Sounder Log and Temperature Wind Instruments Contact us: North America Outside N. America This is the US site change currency here get manual get brochures home
	Wind-6 3 years warranty Receive 20% reduction for Tecnautic orders over the web. Send us an e mail!	Components:	Option: Ultrasonic Wind Sensor PB200 (with GPS, Compass, Inclinometer and Air data Sensor in one package). No moving parts!
	# 81 00 00 $1'416.02 Web price $1132.81	The package # 81 00 00 comprises the "Wind" Display, the Precision Wind Sensor, a 25m (80 ft) mast cable, bus cable and connectors. A power connection cable and bus terminator is required once in a system (#500116, web price $34.57).

	"Wind" Display # 81 01 00 or "Multi" Display # 30 00 00	Wind Display: Wind data can be displayed on any display in the system, e.g. on a "Log" Display or "Multi" Display. This reduces system cost. However, if required, any number of "Wind" Displays may be added. Bright yellow LED-pointer around face of display shows apparent and true wind angle. The digital LCD reads: ¤ Apparent and true wind speed ¤ Apparent and true wind angle ¤ VMG upwind and downwind ¤ Magnetic wind direction ¤ Calibration settings ¤ Any other desired function available in the system, e.g. Heading, Boat Speed etc. Price for additional display unit: $643.64 Web price $514.91
	Precision Wind Sensor # 81 01 05	Precision Wind Sensor Cobwebs could eventually block an anemometer wheel during calm periods. However, the Tecnautic Wind Sensor has a little motor inside, that will free it automatically, every time power is turned on. During normal operation, the motor is delivering just enough torque, to compensate for the bearing friction, thus effectively eliminating any drag. The wind angle is sensed with a wedge shaped vane, providing higher accuracy than a single vane. The resulting data are so accurate, that the angle can be measured with a resolution of 0,3 degrees. The Sensor has ball bearings for wind speed and wind angle and has virtually no wear. Sensor # 81 01 05: $689.62 Web Price $551.69
	Option: Airmar® PB200 # 810300 Ultrasonic Wind Sensor Without moving parts!	Option: The Airmar® PB200 Ultrasonic Wind Sensor has no moving parts and comes together with a built in GPS receiver, a Heading-Sensor, an Inclinometer and an air pressure and temperature sensor, all in the same housing. Data are transmitted by the sensor in NMEA format and are shown on the Cockpit displays or - with the included "WeatherCaster" software - on a PC screen. The sensor also suits the autopilot perfectly well, by substituting the standard Fluxgate with its built in compass and GPS. Sensor # 810300: $ 1240.44 Web Price $ 992.35 Mast Cable 50 ft: $ 113.28 Web Price $ 90.63

	Optional JUMBO Displays have 40 mm (1.5 in.) large digits and can display all available parameters of the system. Size 6.3x3.0x2.2 in. (160 x 78 x 55 mm). Jumbo Display: $981.10 Web Price $784.88 A bus cable with sealed connector is required once for every group of Jumbos: (# 500410, 10m length, Web Price $51.49) Click here for features and description. part # 40 02 05 ... with yellow digits part # 40 02 10 ... with red digits

	Mast Angle Sensor (for rotating mast) # 81 01 40	In case of a rotating mast, the mast angle has to be taken into account, when measuring the wind direction. This is a fully automatic feature on the TECNAUTIC Wind-6. Only a mast angle sensor has to be installed at the mast foot and be connected to a Cockpit Display with an unused sensor input. Web Price $260.40

user manual

Set Price US$
Part List US$

top

Wind-6